Biomass pellet mill can pelletize a variety of forest and agricultural waste or residues. Featuring highly efficient fuel value and convenient storage, pellets can be used for civil life and in households; it is also an ideal fuel for biomass industrial boiler replacing coal burning for a better environment; also for thermal power generation.

On the back of the biomass pellet mill is a grease pump which mainly lubricates bearings of two press rollers in the pelletizing chamber. Technically, pelletizing demands a stable and constant lubricating system to ensure roller bearings can work in the condition of high pressure and high temperature, otherwise, roller bearings will be burnt rapidly, not to mention expanding the service life. The operator-oriented lubricating design stands out among all pellet mill suppliers.

Main Components of Biomass Pellet Mill:

1. Feeder: this system has two parts, namely, driving part and screw feeder.

2. Conditioner (mixer): it has two parts, namely, the drive system and stainless steel conditioner.

3. Drive system: it includes motor and a set of V-belt which then can help reduce rotation speed of the conditioner.

4. Emergent door: a smaller front door is mounted with hydraulic cylinder to discharge material for emergency (for example, pelletizing chamber is choked.)

5. Driving part: it consists of AC electromagnetic motor and cycloidal pin gear reducer, the two of which are connected by a coupling and driven by a screw shaft.

6. Screw feeder: composed of coupling, screw shaft, pitch changing spirochete, stainless steel housing and end bearings, the feeder is designed to convey feedstock into the mixer.

7. Conditioner: it consists of end bearings, shaft, paddles, stainless steel housing and water pipe, capable of mixing water and feedstock properly to soften the latter for the convenient of pelleting.

8. Water-spraying system: it can be put into use if material is inadvertently over-dried and it is just installed on the conditioning chamber for material moisture content to edge up a little in the conditioner.

Welcome to visit Fote Machinery: info@sinoftm.com.